An Intensive 5 - Day Seminar On
EuroMaTech is proud to be associated with the following accreditation bodies:
The PMI Registered Education Provider logo is a registered mark of the Project Management Institute, Inc
Principles, Applications and Performance of Pumps, Compressors and Turbines
ISO 9001:2015 Certified
ISO 29990
ISO 29990:2010 Certified
HR
CERTIFICATION INSTITUTE™
APPR O V E D P R O VID
ER Partner
MEMBER
17 - 21 Dec 2017, Dubai04 - 08 Feb 2018, Dubai24 - 28 Jun 2018, Dubai23 - 27 Dec 2018, Dubai
23-A
UG
-17
INTRODUCTIONThe Principles, Applications and Performance of Pumps,
Compressors and Turbines training course will focus on the
importance of rotating machinery such as pumps, compressors
and turbines of various designs and applications, which are
encountered throughout process industry, petrochemical and
oil and gas industries. This EuroMaTech training course will
start with an introduction to liquid and gas systems including
pressure and head, capacity and flow, friction head losses &
operational dynamics. Centrifugal and positive-displacement
pumps, compressors and turbines, will all be introduced,
together with their main construction and parts.The application
of the different types of pumps, compressors and turbines will
be discussed along with their suitability for different operational
duties. Operation, troubleshooting and maintenance will also be
dealt with.
The key highlights of this EuroMaTech training course are:
• Solid knowledge of basic principles of fluid flow
• Optimisation of the operation and maintenance of
different types of pumps, compressors and turbines
• Confidence to troubleshoot problems related to pumps
compressors and turbines, thereby avoiding repetitive
failures
• Allow tighter control of maintenance budgets by the
avoidance of unplanned equipment failures in service
WHO SHOULD ATTEND?• Technicians and Operators
• Graduate Engineers
• Mechanical and Process engineers
• Plant engineers responsible for operations, maintenance
and troubleshooting
• Maintenance and Instrumentation Professionals
• Technologists and Facility Operators
• Supervisors, Team and Project Leaders
The Principles, Applications and Performance of Pumps,
Compressors and Turbines training course will also of benefit
anyone who wishes to update themselves on pump, compressor
and turbine technology, judge the suitability of different types
of pumps, compressors and turbines for their needs, and learn
how to operate and maintain them for the benefit of their
organisations.
Principles, Applications and Performance of Pumps, Compressors and Turbines
Middle East Office : Telephone : +971 4 4571 800 | Fax : +971 4 4571 801 | e-mail: [emailprotected] | www.euromatech.com
PROGRAMME OBJECTIVES• Have an understanding of relevant fluid laws and the
different types of pumps and their associated terminology• Have an understanding of Centrifugal and positive
displacement pumps and compressors, and their related components
• Know how to calculate and use pump performance curves and pumping system requirements and have an understanding of different parameters affecting thier operation
• Be able to operate pumps and compressors as close as possible to the design efficiency
• Know the different types and major components of turbines• Understand the working principles and characteristics of
turbines and know the major components• Have the ability to perform troubleshooting of systems
involving pumps, compressors and turbines• Have learnt about selection, operation and maintenance
strategies
TRAINING METHODOLOGYThe Principles, Applications and Performance of Pumps, Compressors and Turbines training course will be conducted along workshop principles with formal lectures, computer simulation, relevant videos, case studies and interactive worked examples. Relevant case studies will be provided to illustrate the application of each tool in an operations environment. Each learning point will be re-enforced with practical exercises. There will be ample opportunities for discussion and sharing experiences. Hard and soft copies of the programme manual will be presented to each delegate.
PROGRAMME SUMMARYThe knowledge gained in this EuroMaTech training course will provide better understanding of pumps, compressors and turbines in complex operating conditions. The delegates will be able to develop a proactive maintenance system which will allow better inspection, control and monitoring with the goal of avoiding unplanned equipment failures and maximising compressor and turbine availability and reliability.
This EuroMaTech training course will give the delegate the required level of technical knowledge and skill to achieve that personal satisfaction.
• Understanding of reciprocating and rotating equipment operating and maintenance techniques
• Ability to put in place measures to quantify equipment condition
• Interface with pump, compressor and turbine equipment providers
• Identify and specify new and replacement pumps, compressors and turbines
• Ability to operate and troubleshoot rotating equipment
EuroMaTech is recognized by the Society for Maintenance & Reliability Professionals (SMRP) as an Approved Provider. The SMRP Approved Provider status allows EuroMaTech of host a number of maintenance & reliability related continuing education trainings. This training course is approved by SMRP to issue 25 Continuing Education Course Hours (CECHs) towards recertification of CMRP, CMRT or CAMA credentials.
DAY 01
INTRODUCTION AND FLUID LAWS
• Introduction to basic types and principles of, Pumps,
Compressors and Turbines
• Basic liquid and gas Laws
• Understanding Head
• Types of flow and losses
• Net Positive Suction Head (NPSH)
DAY 02
PUMPING SYSTEMS, PUMP PERFORMANCE AND PUMP TYPE CONSTRUCTION
• Pump type and Performance (Centrifugal and Positive
Displacement)
• Pump characteristics. Head, Capacity, Power, Efficiency and
Net Positive Suction Head (NPSH)
• Pump Curves and System Curves.
• Positive Displacement Pumps, Reciprocating and Rotary
• Dynamic Pumps Types, Centrifugal, Axial, Mixed, Multistage,
etc.
• Sealing Systems. Conventional Packing Glands and
Mechanical Seals
DAY 03
COMPRESSOR CONSTRUCTION, TYPES, CHARACTERISTICS AND PERFORMANCE
• Positive displacement compressors, reciprocating
compressors, reciprocating compressors, diaphragm
compressors.
• Rotary compressors, rotary screw compressor, lobe type
air compressor, sliding vane compressors, liquid ring
compressors
• Dynamic compressors, centrifugal compressors, axial
compressors
• Principle of operation and performance curves
• Surging and choking problems
PROGRAMME OUTLINE
In-House TrainingEuroMaTech is capable of conducting this training
programme exclusively for your delegates. Please e-mail
us on [emailprotected] for further information
and/or to receive a comprehensive proposal.
ISO 9001:2015 Certified
ISO 29990
ISO 29990:2010 Certified
U.K. Office : Telephone +44 151 709 7100 | Fax +44 151 709 7181 | e-mail: [emailprotected] | www.euromatech.comMiddle East Office : Telephone : +971 4 4571 800 | Fax : +971 4 4571 801 | e-mail: [emailprotected] | www.euromatech.com
DAY 04
TURBINE TYPES, CONSTRUCTION AND PERFORMANCE
• Turbine Types
» Gas Turbines
» Steam turbines
• Turbine Operation
• Main components
» Nozzles
» Stator and Rotor Blades (Vanes) Configuration and Flow
• Aerofoil and Twisted Contours
• working cycle of a gas turbine, representation of the
Pressure-Volume diagram (indicator card)
• Stages
DAY 05
TROUBLESHOOTING & MAINTENANCE
• Potential Failure Analysis
• Troubleshooting
» Review of common faults
» Developing a Preventive Maintenance Plan
• Vibration causes, forcing frequency causes, unbalance,
misalignment, mechanical looseness, bearing defects, gear
defects, oil whirl, blade or vane problems
• Cavitation
• Water Hammer
» What causes water hammer?
» Solutions for water hammer
• Review of the Week & Wrap-Up
Seminar Registration Details
YOUR DETAILS
METHOD OF PAYMENT
SEMINAR DETAILS
EASY WAYS TO REGISTER
Disclaimer
Name (Mr/Ms): .........................................................................................................................................................................................................................Position: Organisation: ..........................................................................................................................................................................................................Address: ...................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................City / Country: ..........................................................................................................................................................................................................................Telephone / Fax: ......................................................................................................................................................................................................................
£ Please find enclosed a cheque made payable to EuroMaTech
£ Please invoice me
£ Please invoice my company as follows:
Contact Name: ........................................................................................................................................................................................................................
Company Name: .....................................................................................................................................................................................................................
Address: ....................................................................................................... ...........................................................................................................................
DocumentationHigh Quality material has been prepared by the Seminar Leader for distribution to delegates. In addition a special note pad to facilitate note taking will be provided.
CertificatesA Certificate of Completion will be issued to those who attend & successfully complete the programme.
Schedule07:30 – 08:30 Welcome08:30 – 10:15 First Session10:15 – 10:30 Coffee Break10:30 – 12:15 Second Session12:15 – 12:30 Coffee Break12:30 – 14:00 Third Session14:00 – 15:00 Lunch15:00 – 16:00 Open Session
FeesThe Fee for the seminar, including instruction materials, documentation, lunch, coffee/tea breaks & snack is:
Hotel AccommodationEuroMaTech has negotiated special rates for a limited number of
rooms in the hotel. Early registration will help to secure a room at
the reduced rate.
Registration & PaymentPlease complete the registration form on this page & return it to us
together with your cheque made payable to EuroMaTech.
For Further Information, Contact Your Nearest EuroMaTech Office:
U.K. Office109 Mount Pleasant
Liverpool L3 5TF, United Kingdom
Telephone +44 151 709 7100 Fax +44 151 709 7181
e-mail: [emailprotected] http://www.euromatech.com
Middle East OfficeP.O.Box 74693, Dubai, United Arab Emirates
Telephone : +971 4 4571 800 Fax : +971 4 4571 801
e-mail: [emailprotected] http://www.euromatech.com
EuroMaTech reserves the right to alter the content, location of the Seminar, or the identity of the speakers in case of events beyond our control.
Principles, Applications and Performance of Pumps, Compressors and Turbines
Please register me on the :Complete & Mail or fax to EuroMaTech at the address given below
Cancellation Policy
Request for seminar cancellation must be made in writing & received at EuroMaTech three weeks prior to the seminar date. A U.S.$250/- processing fee will be charged per delegate for each cancellation. Thereafter, we regret that we are unable to refund any fees due, although in such cases we would be happy to welcome a colleague who would substitute for you.
2017 US$ 4,500/ = per delegate2018 US$ 4,750/ = per delegate
Telephone: +971 4 4571800 to provisionally reserve your place.
Fax your completed registration form to: +971 4 4571801
E-mail to us : [emailprotected] [emailprotected]
Complete & return the booking form with cheque to:EuroMaTech P.O.Box 74693, Dubai - U.A.E.
£ 17 - 21 Dec 2017, Dubai£ 04 - 08 Feb 2018, Dubai£ 24 - 28 Jun 2018, Dubai£ 23 - 27 Dec 2018, Dubai